Endings Expan

Expan T1: Base Ending

Compressed cartridge heaters. Base ending Ref. "T1"

The cartridge is fully compressed, with a heat resistant cerais paste with selas the entry. The remaining cartidges are made from this base.

Cartridge Heater Ending T1
Cartridge Heater Ending T1
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4" 1"
Diameter nominal 0.375" 0.500" 0.625" 0.750" 1.000"
H7 minimum 0.373 0.497 0.621 0.746 0.994
B (inches) 0.276+1%L 0.394+1%L 0.591+1%L 0.591+1%L 0.787+1%L
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
7.874
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20 25
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85 24.85
B (mm) 7+1%L 10+1%L 15+1%L 15+1%L 20+1%L
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
200
1500
F (mm)
Standard
Customer
250

Expan T3: Chip Ending

Compressed catridge heaters. Chip ending Ref. "T3"

Cartridge with a steatite ceramic piece. Ready for quick change of wires.

Cartridge Heater Ending T3
Cartridge Heater Ending T3
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4" 1"
Diameter nominal 0.375" 0.500" 0.625" 0.750" 1.000"
H7 minimum 0.373 0.497 0.621 0.746 0.994
B (inches) 0.276+1%L 0.394+1%L 0.591+1%L 0.591+1%L 0.787+1%L
C (inches) 0.68 0.70 0.70 0.70 1.32
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
7.874
59.055
D Ø Diameter (mm) 10 12.5 16 20 25
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85 24.85
B (mm) 7+1%L 10+1%L 15+1%L 15+1%L 20+1%L
C (mm) 17.25 17.80 17.80 17.80 33.60
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
200
1500

Expan T7: Disc Plate Ending

Compressed cartridge heaters. (pletina) iron plate ending. Ref. "T7"

Fully compressed and reinforced cartridge. Ready for fastening the object to be heated. Ideal for areas with motion and vibration.

Cartridge Heater Ending T7
Cartridge Heater Ending T7
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4" 1"
Diameter nominal 0.375" 0.500" 0.625" 0.750" 1.000"
H7 minimum 0.373 0.497 0.621 0.746 0.994
B (inches) 0.276+1%L 0.394+1%L 0.591+1%L 0.591+1%L 0.787+1%L
C (inches) 0.787 0.787 1.008 1.008 1.299
E (inches) 0.039 0.059 0.059 0.059 0.059
G (inches) 1.063 1.063 1.299 1.299 1.614
H (inches) 0.126 0.126 0.165 0.165 0.205
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
7.874
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20 25
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85 24.85
B (mm) 7+1%L 10+1%L 15+1%L 15+1%L 20+1%L
C (mm) 20 20 25.6 25.6 33
E (mm) 1 1.5 1.5 1.5 1.5
G (mm) 27 27 33 33 41
H (mm) 3.2 3.2 4.2 4.2 5.2
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
200
1500
F (mm)
Standard
Customer
250

Expan T7B: Iron Plate Ending

Compressed cartridge heaters. (pletina) iron plate ending. Ref. "T7B"

Fully compressed and reinforced cartridge. Ready for fastening the object to be heated. Ideal for areas with motion and vibration.

Cartridge Heater Ending T7B
Cartridge Heater Ending T7B
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4"
Diameter nominal 0.375" 0.500" 0.625" 0.750"
H7 minimum 0.373 0.497 0.621 0.746
B (inches) 0.276+1%L 0.394+1%L 0.591+1%L 0.591+1%L
C (inches) 0.354 0.394 0.433 0.512
Ø D (inches) 0.165 0.205 0.205 0.244
E (inches) 0.079 0.079 0.079 0.079
G (inches) 0.177 0.197 0.217 0.256
H (inches) 0.551 0.640 0.748 0.906
I (inches) 0.374 0.394 0.472 0.709
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85
B (mm) 7+1%L 10+1%L 15+1%L 15+1%L
C (mm) 9 20 11 13
Ø D (mm) 4.2 5.2 5.2 6.2
E (mm) 2 2 2 2
G (mm) 14 16.25 19 23
H (mm) 9.5 10 12 18
I (mm) 9.5 10 12 18
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
F (mm)
Standard
Customer
250

Expan T8: Nipple Ending

Compressed cartridge heaters. nipple ending. Ref. "T8"

Fully water resistant and reinforced cartridge. Ready for removal by means of a screw, should the cartridge become dislodged. Ideal for areas where preassure and fluids are watertight. The ending Ref. T8 is indicate for heating of areas with internal preassure (oil tanks, water, glue, plastic) or deflagration.

Cartridge Heater Ending T8
Cartridge Heater Ending T8
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4"
Diameter nominal 0.375" 0.500" 0.625" 0.750"
H7 minimum 0.373 0.497 0.621 0.746
B (inches) E+1%L E+1%L E+1%L E+1%L
C (inches) 0.157 0.157 0.157 0.157
E (inches) 0.423 0.502 0.591 0.591
G (inches) 1/4" 3/8" 1/2" 3/4"
H (inches) 0.669 0.748 0.945 1.063
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85
B (mm) E+1%L E+1%L E+1%L E+1%L
C (mm) 4 4 4 4
E (mm) 10.75 12.75 15 15
G (mm) M14 M16 M20 M26
H (mm) 17 19 24 27
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
F (mm)
Standard
Customer
250

Expan T9: Ending 90º

Compressed cartridge heaters. ending 90º Ref. "T9"

Fully watertight and reinforced cartridge. Ready for removal from its accommodation. With reinforcement wich prevents deformation in case of displacement of the same. The ending Ref. T9 can be used in any hostile situation (high temperature, waste material).

Cartridge Heater Ending T9
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4" 1"
Diameter nominal 0.375" 0.500" 0.625" 0.750" 1.000"
H7 minimum 0.373 0.497 0.621 0.746 0.994
B (inches) 0.197+1%L 0.276+1%L 0.394+1%L 0.591+1%L 0.591+1%L
C (inches) 0.472 0.591 0.709 0.984 1.181
Ø E Tube 0.394 0.484 0.563 0.709 0.787
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
7.874
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20 25
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85 24.85
B (mm) 5+1%L 7+1%L 10+1%L 15+1%L 15+1%L
C (mm) 12 15 18 25 30
Ø E Tube 10 12.3 14.3 18 20
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
200
1500
F (mm)
Standard
Customer
250

Expan T9B: Ending 90º

Compressed cartridge heaters. ending 90º Ref. "T9B"

Fully watertight and reinforced cartridge. Ready for removal from its accommodation. With reinforcement wich prevents deformation in case of displacement of the same. The ending Ref. T9B can be used in any hostile situation (high temperature, waste material).

Cartridge Heater Ending T9B
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4" 1"
Diameter nominal 0.375" 0.500" 0.625" 0.750" 1.000"
H7 minimum 0.373 0.497 0.621 0.746 0.994
B (inches) 1.06+1%L 1.16+1%L 1.54+1%L 1.691+1%L 2.09+1%L
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
7.874
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20 25
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85 24.85
B (mm) 27+1%L 30+1%L 39+1%L 43+1%L 53+1%L
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
200
1500
F (mm)
Standard
Customer
250

Expan T9PB: Ending 90º

Compressed cartridge heaters. ending 90º Ref. "T9PB"

Fully water resistant and reinforced cartridge. Ready for removal from its acommodation. With reinforcement wich prevents deformation in case of displacement of the same. The ending Ref. T9PB can be used in any hostile situation (high temperature, waste material).

Cartridge Heater Ending T9PB
D Ø Diameter (in) 3/8" 1/2" 5/8" 3/4" 1"
Diameter nominal 0.375" 0.500" 0.625" 0.750" 1.000"
H7 minimum 0.373 0.497 0.621 0.746 0.994
B (inches) 1.06+1%L 1.16+1%L 1.54+1%L 1.69+1%L 2.09+1%L
Ø E Tube 0.315 0.394 0.492 0.630 0.787
L (inches)
minimum
maximum
2.953
47.244
2.953
47.244
3.937
59.055
3.937
59.055
7.874
59.055
F (inches)
Standard
Customer
9.843
D Ø Diameter (mm) 10 12.5 16 20 25
Diameter nominal
H7 minimum
9.85 12.35 15.85 19.85 24.85
B (mm) 27+1%L 30+1%L 39+1%L 43+1%L 53+1%L
Ø E Tube 8 10 12.5 16 20
L (mm)
minimum
maximum
75
1200
75
1200
100
1500
100
1500
200
1500
F (mm)
Standard
Customer
250